Cloud Trade Copier With No VPS and No Desktop App
PickMyTrade is a cloud trade copier that runs entirely online, so there is no VPS to rent, no desktop app to install and no broker plugins to maintain. Copy one TradingView alert or one manual trade across your accounts on 10 supported brokers, from any browser or phone. PickMyTrade processes your order in under 200ms on our side, and total fill time also depends on your broker's execution, network latency and how fast TradingView sends the alert.
No credit card required. Nothing to download.
What is a cloud trade copier?
A cloud trade copier copies one source trade across several accounts from remote servers, instead of from software running on your own computer. You connect your accounts once, and every entry, exit, stop-loss and take-profit copies automatically. Because the copier lives in the cloud, there is nothing to install, nothing to keep patched and nothing that stops working the moment you close your laptop. That is the whole idea: your trades copy whether you are at your desk, on your phone or asleep.
This is the opposite of the old download-and-run model. A traditional desktop copier installs on one machine, has to stay open, and usually needs a rented VPS so it keeps running when your home PC is off. A cloud-based trade copier does that always-on job for you on managed infrastructure, so a VPS is simply not part of the setup.
PickMyTrade runs entirely in the cloud. A single TradingView alert, or a trade you place by hand on a master account, is received online and routed to every connected account in real time. There are no plugins, no desktop application and no browser extensions to manage. The rest of this page gives you the honest comparison of cloud versus local copiers, explains exactly what skipping the VPS saves you, shows the 10 brokers you can reach from one account, and is upfront about the one case where a local setup still wins.
Cloud vs local trade copier: an honest comparison
A local copier on your PC or a VPS, and a cloud copier, are built for different priorities. Here is the straight version, including where local is genuinely better.
| Factor | Cloud copier (PickMyTrade) | Local / desktop + VPS copier |
|---|---|---|
| Monthly cost | Flat $50/mo, no separate VPS bill | Copier license plus VPS rental (often $15 to $100+ per month) |
| Runs when your PC is off | Yes, always on in the cloud | Only if a VPS stays running; a home PC has to stay powered on |
| Device independence | Manage from any browser, phone or laptop | Tied to the one machine or VPS it is installed on |
| Setup and maintenance | No install, no OS updates or plugins to babysit | Install, patch and monitor both the app and the VPS |
| Raw latency | Under 200ms order processing on our side; total fill time varies with your broker, network and TradingView alert speed | Can be lower on a VPS co-located near the exchange |
| Broker reach | 10 brokers from one account | Often locked to a single desktop platform or terminal |
| Best for | Most futures, prop and multi-account traders | Hardcore scalpers who need co-located, single-digit-millisecond fills |
The short version: cloud wins on cost, uptime, convenience and broker reach. Local can win on raw latency for a very narrow group of traders. The section further down is honest about exactly who that is.
Why no VPS is needed, and what that saves you
A VPS, or virtual private server, is a rented always-on computer in a data center. Traders use one so a desktop copier keeps running after they close their laptop. It solves a real problem, but it adds a real cost and a real chore: a monthly bill, an operating system to update, and one more thing that can crash at 3am while you are not watching. A no VPS trade copier removes that whole layer.
Because PickMyTrade already runs on managed cloud infrastructure, the always-on job is done for you. That means three concrete savings. First, cost: you pay one flat $50 per month for the copier and nothing for a server, instead of stacking a VPS rental on top of a copier license. Second, maintenance: there is no machine to patch, no app to reinstall after an update, and no plugin to reconnect. Third, single-machine risk: your copying does not depend on one PC or one VPS staying online, so a reboot, a Windows update or a power cut at home does not knock your trades offline.
One honest note, so this is not misleading. PickMyTrade does offer an optional VPS product for traders who want a dedicated machine to keep their TradingView charts or indicators running around the clock. That is a separate choice for your charting, and it is never required for the copier. The copier itself is fully cloud based, so you can run it with no VPS at all.
Multi-broker, multi-account copying from the cloud
A cloud-based trade copier has one big structural advantage over a desktop tool: it is not tied to a single platform. Because PickMyTrade connects to brokers through the cloud rather than a local terminal, one account reaches 10 supported brokers, and one TradingView alert can copy across the accounts you hold on them. A local NinjaTrader-style copier, by contrast, generally lives inside one desktop platform and cannot reach that spread of brokers.
PickMyTrade supports Tradovate, Rithmic, Interactive Brokers, TradeStation, TradeLocker, ProjectX, Match-Trader, Tradier, cTrader and Ironbeam. You connect the accounts you want to copy to, set a per-account size for each, and PickMyTrade places the matching order on all of them when your signal fires. There is no code to write and no plugin to install on any of them.
Prop firm and funded accounts
Many prop and funded traders like the cloud model because they run several accounts at once and do not want them chained to one PC. PickMyTrade connects to accounts on Tradovate, Rithmic and ProjectX, which many prop firms run on, and traders use it alongside firms such as Apex, Topstep, Alpha Futures, Take Profit Trader, FundedNext Futures, MyFundedFutures, TradeDay and Tradeify.
Here is the honest part. Copy trading and automation rules vary by prop firm and change over time, so always confirm your firm's current policy before you go live. PickMyTrade is built to copy your own alerts across your own connected accounts, so you stay in control of every trade. For deeper walkthroughs, see the Tradovate trade copier hub and the prop-firm copier pages such as Take Profit Trader and FundedNext Futures.
When a local copier still wins, and why cloud fits most traders
We are not going to pretend cloud beats everything. If your entire edge is speed, a local copier installed on a server co-located near the exchange can reach lower raw latency than any cloud service, PickMyTrade included. A hardcore scalper firing dozens of tickets a session, chasing single-digit-millisecond fills, has a genuine reason to run local execution close to the matching engine. That is the one place where the old desktop model still has the edge, and some tools lean hard on this angle to pull scalpers toward a local setup.
For almost everyone else, that trade-off runs the other way. Swing traders, intraday traders, prop-account traders and anyone copying across multiple accounts are not competing on microseconds. What actually costs them money is a copier that goes down because a home PC rebooted, a VPS bill that eats into profit, or being unable to check positions because the tool is stuck on one machine. Cloud removes all three, and you still get order processing in under 200ms on our side.
So the honest rule of thumb is simple. If you need co-located, ultra-low-latency execution and you trade one platform, a local copier may suit you better. If you value reliability, zero install, the freedom to manage from any device, and reaching many accounts across 10 brokers without a plugin, a cloud trade copier is the better tool. Most traders sit firmly in the second group.
Latency and reliability, stated accurately
It is easy to find copier pages that promise a hard end-to-end fill speed. We will not, because no cloud service can honestly guarantee it. Here is what is true and measurable: PickMyTrade processes your order in under 200ms on our side. When one signal fans out to several accounts, they receive the trade within seconds.
Your total fill time also depends on things outside any copier's control: your broker's execution speed, network latency between the systems involved, and how quickly TradingView sends the alert in the first place. Those add up differently for every trader, which is exactly why a guaranteed end-to-end number would be marketing, not fact. What we can commit to is fast, consistent processing on our side and a fan-out that reaches every connected account quickly.
Reliability is where cloud quietly pulls ahead. Because there is no desktop app to crash and no single VPS to fall over, your copying does not hinge on one machine staying up. PickMyTrade runs 24/7 in the cloud, so once your accounts are connected and your alert is live, trades keep copying even when your computer is asleep or switched off. For high-frequency needs, review whether cloud latency fits your strategy before you commit; for most futures and multi-account traders, it does.
Pricing and free trial
One flat plan covers the whole cloud copier, and there is no VPS bill stacked on top. Every account starts with a 7-day free trial, and no credit card is required, so you can test copying in the cloud before you pay a cent.
Monthly
$50/mo
Cloud copier, no VPS required
Yearly
$500/yr
Two months off versus monthly
No credit card required. See the full pricing page for details.
Why traders choose PickMyTrade
Proof you can measure: more than 50,000 traders run PickMyTrade, with over 28M trades placed. It is fully cloud based, needs no VPS and no install, and reaches 10 brokers from one account.
Cloud trade copier FAQ
Straight answers to the questions traders ask before going cloud.
A cloud trade copier runs entirely on remote servers instead of on your own computer, so it copies one source trade across several accounts without any software installed on your machine. With PickMyTrade, your TradingView alert or manual trade is received in the cloud and routed to every connected account automatically. There is no VPS to rent, no desktop app and no broker plugin to keep updated, and it keeps working even when your computer is switched off.
No. PickMyTrade is fully cloud based, so you do not need a VPS to copy trades. The copier already runs on our always-on infrastructure, which is the job a VPS would normally do for a desktop copier. If you separately want a VPS to keep TradingView charts or an indicator running, that is your choice, but it is never required for the copier itself.
For most futures, prop and multi-account traders, a cloud copier is the better fit because there is nothing to install, it works from any device and it keeps running when your PC is off. A local copier installed on your computer or a VPS can reach lower raw latency when it is co-located near the exchange, which matters for a small group of ultra-fast scalpers. If your edge depends on single-digit-millisecond fills, local execution can win. If it depends on reliability, convenience and reaching many accounts across brokers, cloud wins.
Yes. Because PickMyTrade runs in the cloud 24/7, your trades copy automatically even when your computer is asleep, shut down or offline. Once your accounts are connected and your alert is live, you can close the browser and walk away, and the copier still receives your signals and places the orders.
No. PickMyTrade needs no plugins, no desktop application and no browser extensions. You connect your broker accounts and set up your alerts in the web dashboard, and everything else happens in the cloud. This is a real difference from download-and-run copiers that install on a specific machine and have to be patched and monitored.
For the vast majority of strategies, cloud is fast enough. PickMyTrade processes your order in under 200ms on our side, and total fill time also depends on your broker, network latency and how quickly TradingView sends the alert. A local setup co-located near the exchange can beat that on raw latency, so hardcore scalpers who need sub-2ms fills may prefer local execution. Swing, intraday, prop and multi-account traders almost never need it, and they gain reliability and device independence in return.
Copy trades in the cloud, with no VPS
Join 50,000+ traders using PickMyTrade to copy trades across their accounts on 10 brokers. No install, no plugins and no VPS bill, plus a 7-day free trial with no credit card. You can be live from any browser in minutes.
Explore the trade-copier cluster